Specification
4G LTE Wi-Fi Gigabit Router
�����
Model: BT62i
B L A C K�� T O R N A D O
������������������������������������������������������������� Maintenance � Free Connections
Introduction
LTE (Long Term Evolution) is already gaining momentum as the world�s most rapidly deployed cellular technology, giving mobile wireless broadband services to millions of users worldwide. Consumers are increasingly looking for always on, always connected mobile experience delivering high data rate services on small form factor mobile devices whilst at the same time expecting long battery life to minimize recharge cycles.
BT62i is highly advanced LTE indoor multi-service product solution specifically designed to meet integrated data, and dual bands Wi-Fi access needs for residential, business and enterprise users.
In this product, we provide Gigabit networking and dual bands Wi-Fi AP functionalities, it enables wide service coverage and provides high data throughput and networking features to customers who needs easy broadband access, hot-spot Wi-Fi connectivity.
Interactive User Interface
Technical Features
� Support Dual Mode LTE-TDD / LTE-FDD
� Support Dual Band Wi-Fi (2.4GHz./ 5GHz) Concurrent
� Support Dual Stack IPv4/IPv6
� Support Carrier Aggregation combination (inter / Intra)
� Support Category 6 (300Mbps downlink, 50Mbps uplink)
� Support 2 LAN ports, 10x100x1000 Mbps
� Support 1 WAN port
� Support Multi APN Management
� Support Multi SSID
� Support Short Message System
� Support Small Network Management Protocol (SNMP)
� Support CWMP TR069 and Certification (Primary and Secondary)
� Support Server Network Time protocol (SNTP).
� Support EARFCN lock, frequency lock, and PCI lock.
� Support two login access, root for administrator and admin for clients
� Support DDNS or DNS Agency
� Support WPS Soft Button
� Support NAT Mode, Tunnel Mode, Bridge Mode
� Support VPN (L2TP, GRE, PPTP, VXLAN)
� Support IPSec VPN
� Support External Battery for portability (Optional)
� Support WiFiDog server (Optional)
���������
��������
BASIC SPECIFICATIONS
LTE Standard |
3GPP latest Release, 8, 9, 10 & 11 |
Ethernet LAN/WAN Port |
1*RJ-45 port LAN 10/100/1000 auto-sensing, 1*RJ-45 port LAN / WAN |
Smart Wi-Fi Dual Mode |
2.4GHz (802.11 b/g/n) 5GHz (802.11 ac) |
LED Indicators |
8 Blue LED indicators (PWR, Wi-Fi 2.4GHz, Wi-Fi 5GHz, LTE, RF and 4 Signal Level) |
USIM |
1.8v/3.0v Mini-SIM (3FF) |
Antenna |
4 Built-in |
Restore Button |
Press for 10 Sec. to factory restore settings |
Power Switch |
ON/OFF button |
Wi-Fi Switch |
ON/OFF Push button 15 Sec. hold |
WPS Switch |
ON/OFF Push button 3 Sec. hold |
Front Panel LED |
ON/OFF Push button |
Power Supply |
Input: Universal range 100V to 240V AC, Output 5VDC / 2A |
Power Bank |
Chargeable Battery and charging system (Optional) |
ID Design
Battery location
Weight 300 + 100 gram
Black Color
LTE SPECIFICATIONS
LTE Mode |
Dual Mode (TDD / FDD) |
Support Bands |
FDD Band: B1, B3, B7, B8, B20 TDD Band: B40, B42 |
Bandwidth |
1.4, 3, 5, 10, 15, 20MHz |
Carrier Aggregation |
2CC CA [Inter / Intra] |
Max Output Power |
23 � 2dBm per Tx antenna |
MIMO |
DL 4x4 MIMO |
Uplink channel |
PUCCH, PUSCH, PRACH |
Downlink channel |
PDCCH, PDSCH, PBCH, PCFICH, PHICH |
Peak Rate (20 MHz) |
FDD: DL 300 Mbps, UL 100 Mbps TDD: DL 220 Mbps, UL 15 Mbps |
Number of Resource Blocks |
6 ~ 110 |
Transmission Mode |
TM 1.2,3,4,7,8,9 |
Modulation |
DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM, 64QAM |
Receive Sensitivity |
-94dBm @ QPSK, 20 MHz, 25�C |
Antenna Type |
ABS |
Antenna Gain |
5dBi |
Antenna Efficiency |
>60% or more |
Polarization |
Linear, Vertical |
VSWR |
700~2700<4 and 3300~3800<3 |
Radiation |
Omni-directional |
Admitted Power |
1w |
LTE RADIO STATUS INFORATION
General Info |
USIM |
Operator |
EMM State |
PLMN |
eNodeB ID |
RRC State |
|
IMEI |
Cell ID |
TAC |
|
IMSI |
C-RNTI |
ECI |
|
Signal Details & Carrier Aggregation |
PCI |
EARFCN |
Bandwidth |
SINR |
CINR |
CQI |
|
RSSI |
RSRQ |
RSRP |
|
DL MCS |
UL MCS |
RANK |
|
DL Frequency |
DL Frequency |
Band |
|
Transfer mode |
Intra Band |
Inter Band |
|
TXPWR |
PCC |
SCC |
SOFTWARE SPECIFICATIONS
LTE Network Mode |
NAT Mode Bridge Mode Tunnel Mode |
LAN Network |
IPv4 address DHCP Statics Lease DHCP Relay |
Mobile Network Connection |
Auto Manual |
4G LTE Connection |
Roam (Enable / Disable) Power Scan (First Detected Cell, Strongest Cell) Band Selection: Full Band, Dedicated Mode (TDD, FDD), Lock Mode, PCI Lock Mode EARFCN, Frequency Cell Scan Neighbor Cell Scan APN Management Settings |
Wi-Fi (2.4GHz) |
Wi-Fi� Enable / Disable Bandwidth: 20MHz / 40MHz Access Point Isolate Channel Selection: Manual, Auto Channel Range 1 to 13 SSID: Hidden / Disable / Edit, Support four SSID Security type: No Authentication, WPA-PSK, WPA2-PSK, WPA/WPA2-PSK WPA Algorithm: (TKIP/AES) WPS Enable / Disable |
Wi-Fi (5GHz) |
Wi-Fi� Enable / Disable Bandwidth: 20MHz/ 40MHz/ 80MHz Access Point Isolate Channel Selection: Manual, Auto Channel Range 36 to 64 SSID: Hidden / Disable / Edit, Security type: No Authentication, WPA-PSK, WPA2-PSK, WPA/WPA2-PSK WPA Algorithm: (TKIP/AES) |
WAN Network |
WAN (LTE) WAN (Input Access) |
VPN Server |
L2TP GRE PPTP VxLAN IPsec |
Open NAT |
Port Range Forwarding Port Range Triggering DMZ Setting UPnP Setting ALG Setting |
Remote Access |
DDNS or DNS Agent SNMP |
Firewall |
Terminal Firewall IPv4/IPv6 Filter (Black List / white List) MAC Filter (Black List / white List) URL Filter (Black List / white List) |
System Security |
Remote Web Login Access Control List Block Port scanner Block SYN Flood SPI Firewall |
Terminal Security |
SSH Telnet |
Network Management |
SNMP SAS |
CWMP |
Primary TR069 Certificated Primary Secondary TR069 Certificated Secondary |
Diagnostics |
TCP Dump Ping Traceroute iPerf |
Administration |
Ping Watchdog Web Protocols (https 443 and http 80) NTP Setting MTU Setting PIN Management USIM Setting |
Statistics |
LTE status System up time Device status Firewall status |
QoS |
DHCP Client List Wi-Fi 2.4GHz Client List Wi-Fi 5GHz Client List |
Maintenance |
Date and time setting Restore Factory Settings Backup configuration file Firmware upgrade locally Firmware Over The Air (FOTA) Ping Wi-Fi dog Setting |
Routing |
Route Status Routing Map Static Routes (LAN / WAN) |
System Tools |
Operating Log (Info, Warnings, Errors, Critical) Run-time Log (Info, Warnings, Errors, Critical) Filter, Select, Display, export Logs |
Debugging Software |
DM tools for troubleshooting |
Other Applications |
WiFiDog SMS Schedule Connection Limit WPS Soft Button SSID Bind APN |
Wi-Fi SPECIFICATIONS
Standards Supported |
� 802.11b/g/n compatible Wi-Fi � 802.11e QoS Enhancement (WMM) � 802.11i (WPA, WPA2) No Authentication, shared key, and pair-wise key authentication services |
Channel Bandwidth |
20MHz, 40MHz, 80MHz |
Frequency 2.4GHz |
2.412 (Channel 1) ~ 2.472 (Channel 13) |
Frequency 5GHz |
5.18 (Channel 36) ~ 5.32 (Channel 64) |
TXRX |
2T2R |
MIMO |
2x2 MIMO |
Maximum Data Rate |
� 802.11b: 11Mbps � 802.11g: 54Mbps � 802.11n: 300Mbps � 802.11ac: 866Mbps |
Modulation |
� DSSS with DBPSK and DQPSK, CCK � OFDM with BPSK, QPSK, 16QAM, and 64QAM |
Convolutional Coding Rate: |
1/2, 2/3, 3/4, and 5/6 |
Receive Sensitivity |
� -51dBm @ 135Mbps, typical for 802.11ac � -64dBm @ 65Mbps, typical for 802.11n � -65dBm @ 54Mbps, typical for 802.11g � -76dBm @ 11Mbps, typical for 802.11b |
Maximum Output Power |
� 2.4GHz / 20dBm for ODFM & 18dBm for CCK modulation � 5GHz / 23dBm |
Fast Receiver |
Automatic Gain Control (AGC) |
Antenna Type |
Build-in separate antenna, 2.4GHz, 5GHz |
Antenna Gain |
2.4GHz / 3dBi 5GHz / 5dBi |
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature |
-40�C to 55�C |
Storage Temperature |
-40�C to 70�C |
Operating Humidity |
5% to 95% |
Ingress Protection Rating |
IP65 |
PACKAGE DELIVER
|
1 * Assembled Product |
1 * Ethernet Cable, Cat5 |
|
1� *5V/2A AC / DC Adaptor |
|
1 * Quick Installer Guide |
Contact Us
Bestel Company:
Address: 2nd Floor, #1, No way first alley, North Sattari (close to Kourosh Mall), Tehran
eMail: info@bestel.ir
Tel: +98 21 4401 5347
Head of R&D:� Ali Morawej
Mobile: +98 912 649-3138
eMail: ali.morawej@bestel.ir